LC-1GAL - Leak Check - 1 Gallon
Ratermann’s Oxygen Safe Valve Leak Check
SPECIFICATIONS
- Does not contain mineral oil, vegetable oil, animal oil, fats, ketones, aldehydes, or alcohols as components in the formulation. (Our latest formulation has also phased out fluro surfactants.)
- Does not contain any material that will act as primary skin irritants, skin sensitizers, or produce any other dermatosis.
- Does not possess or produce any objectionable odors. The threshold odor number will be a maximum of 1 with
a maximum odor intensity index of 0.
- Has a pH between 6.5 and 7.5.
- Passes and surpasses Mil-Pref foam tests (minimum 130 mm foam height after 5 min
- Has a residue below .5% by mass.
- Will not support mold growth within the product shelf life (5 years from day of manufacture)
- The formula has also undergone and passed halogen testing (ASME section V, Article 6, T-641, ASTM).
Pressure Test
It is very important to leak check hoses on a regular basis. Often, this test is conducted while the hose is attached to the fill manifold and under pressure. The best gas to use for a leak check (and most expensive) is helium. Helium works well because the helium molecule is very small. As a result, helium will find a leak better than most other gases. Keep in mind that this can get a little spendy, so other inert gases can be substituted.
We do not recommend compressed air or any other gas that could contain impurities.
Ratermann’s Valve Leak Check has passed the following corrosion tests:
10.1 Aluminum Alloy Alclad (2024) - Pass No Corrosion
10.2 Aluminum Alloy (2024) ASTM B209-96 - Pass No Corrosion
10.3 Steel, conforming to SAE-AMS 5046 A-90 - Pass No Corrosion
10.4 Copper, conforming to ASTM B512 - Pass No Corrosion
Find your Leaks Fast and Easily with the Extending Tube to Get in the Hard to Reach Areas.
*TO LOCATE LEAKS: APPLY A SMALL STREAM OF LEAK DETECTION COMPOUND TOWARDS AREA BEING INSPECTED. COMPOUND SPREADS QUICKLY TO PROVIDE LASTING BUBBLES OF FOAM AT LEAKAGE POINT.